Customized solution of brushless gear motor for wing gate

  Honlite believes that the successful promotion of the wing gate in the market is inseparable from the credit of the motor. The common stepping wing gates on the market are mostly belt drives, and the motor drives the pulley. After the belt drives the gate to open and close, the photoelectric switch is limited. The weather will cause thermal expansion and contraction, which will cause the motor to be noisy and the belt to be easily deformed and damaged. The photoelectric switch will also appear insensitive to the limit, which will cause the motor to stall for a long time and affect the service life of the equipment. The brushless geared motor can avoid the above problems. The market requires the wing gate to have the characteristics of no noise during operation, stable operation, no mechanical wear, and long service life. Most manufacturers will consider the brushless geared motor as the best choice.

  Customized solution: using brushless gear motor BLDC57+G

  The motor performance is as follows: outer diameter: 57mm, voltage: 24V, single motor no-load speed: 2900±10%RPM, single motor load speed: 1900±10%RPM, single motor torque: 0.5NM, gearbox torque: 7.5NM, Power: 100W, reduction ratio: 1:18.8 (can be customized), driver: external, can be equipped with encoder

  Note: The above performance can be customized according to customer requirements,

  Technical difficulties: After the test, the overall performance of this brushless geared motor can meet the requirements, but the large noise and large gap are the current problems of many motor manufacturers. Customized program.