The cross-flow fan is mainly composed of three parts: the impeller, the air duct and the motor, and the motor is the power part of the cross-flow fan. Use a high-quality motor: the wind wheel depends on the motor to make it run. If the quality of the cross-flow fan motor is poor, If it cannot operate normally or start weakly, the noise will be relatively large, but if the Hall brushless motor is used, this situation will not occur. Our sensory brushless motor BLDC57 is mainly used in cross-flow fans.
Voltage: 24V
No load speed: 2700rpm
Load speed: 1800rpm
Power: 20W
Torque: 1.2kg-cm
Driver: built in, positive Xuan wave control, very low noise
Size: Motor diameter: 57.8 ± 0.2mm, body length: 68.4 ± 10mm
